DLS CRUISE CRPP-BMW1.4 사용자 설명서 - 페이지 7

{카테고리_이름} DLS CRUISE CRPP-BMW1.4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DLS CRUISE CRPP-BMW1.4 20 페이지.

Below is the assembly for a typical application

of A1, however any combination of gasket may

be useful for a particular installation.

Mount the EVA gasket (97mm x 1mm) on the

underside of the basket. Peel off the protective

cover of the self adhesive tape. Put it on the

underside of the basket, press firmly all around

so that the EVA gasket sticks thoroughly.

Remove the centerpiece of the small ring of the

EVA gasket. This piece will not be used.

Use a narrow tool to pick up the small ring from

the same EVA gasket.

Place the small foam rings over the four

threads on the basket.

Place the plastic adaptor over the speaker and fix

the frame with four included screws.

Mount the rubber gasket (118mm x 1.5mm) on

the underside of the basket.

Mount the foam gasket (115mm x 4mm) on the

top of the basket. Peel off the protective cover of

the self adhesive tape. Press firmly all around so

that the foam gasket sticks thoroughly.