DLS CRUISE CRPP-BMW1.4 사용자 설명서 - 페이지 9

{카테고리_이름} DLS CRUISE CRPP-BMW1.4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DLS CRUISE CRPP-BMW1.4 20 페이지.

Changing speaker

Mount the DLS speakers back in the original place (Door panel or door frame). Use the bolts to attach the

DLS speaker in the door panel. Use a size 8mm or 10mm wrench to re-screw the three bolts to fix the

speaker. When the speakers are mounted in the door frame, use the T20 screw to refix the speaker.

High pass filter for midrange speaker

If the new speakers are powered by the factory installed radio/amplifier we recommend to use the included

cable adapter with installed high pass crossover for the midrange speaker. This crossover lowers the output

below 250Hz by 6db slope, to reduce resonances in the door panel and prevent the midrange speaker from

playing the lower bass tones.

Connect the factory speaker harness to the female connector of the adaptor and the male connector to the

new DLS midrange speaker. If the factory amplifier is replaced with a new one with built in high pass

crossover or more advanced DSP settings this cable won't be needed.

(male)

Hint!

If you are also changing the tweeter and you have the speaker mounted in the door

panel, wait with reconnecting the speaker harness and remounting the door panel.

(female)