AKO 55424 사용자 설명서 - 페이지 5

{카테고리_이름} AKO 55424에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AKO 55424 12 페이지. Trapped person alarm

5542H402 Ed.03

4.- Installation

- Remove the bezels (1) from the device.

- Loosen the screws (2) with a 1/4 turn and open the cover (3).

- Drill the holes needed for the cable entry glands using the pre-stamped centres on the sides of the housing for

guidance. Fix the glands onto the device (4 and 5).

- Make 3 holes in the wall with the aid of the template included.

- Fix the device to the wall using the screws and plugs supplied (6).

- Insert the cables into the glands and wire the device following the diagram on page 6.

- Connect the battery (7) before closing the cover.

- Close the cover (3), insert and tighten the screws (2) and replace the bezels (1).

Ø Max. 20 mm

Ø Max. 25 mm