aion TITAN 매뉴얼 - 페이지 4
{카테고리_이름} aion TITAN에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aion TITAN 11 페이지.
페이지 인쇄PARTS LIST, CONT.
PART
VALUE
D1
1N5817
D2
Ge
D3
Ge
D4
3mm LED
D5
3mm LED
Q1
2N7000
Q2
2N7000
IC1
TL082
IC1-S
DIP-8 socket
SW1
3-pos. DIP
SW2
3-pos. DIP
DRIVE
1MA
TONE
10kB
VOL.
100kB
CLIP
SPDT on-on
HP/LP
SPDT on-on
LED
5mm
IN
1/4" stereo
OUT
1/4" mono
DC
2.1mm
FSW
3PDT
BATT.
9V
ENC
125B
TITAN DYNAMIC DRIVE
TYPE
Schottky diode, DO-41
Germanium diode, DO-7
Germanium diode, DO-7
LED, 3mm, red diffused
LED, 3mm, red diffused
MOSFET, N-channel, TO-92
MOSFET, N-channel, TO-92
Operational amplifier, DIP8
IC socket, DIP-8
DIP switch, 3-position
DIP switch, 3-position
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
16mm right-angle PCB mount pot
Toggle switch, SPDT on-on
Toggle switch, SPDT on-on
LED, 5mm, red diffused
1/4" phone jack, closed frame
1/4" phone jack, closed frame
DC jack, 2.1mm panel mount
Stomp switch, 3PDT
9V battery snap
Enclosure, die-cast aluminum
NOTES
Any germanium diode should work about the same in this circuit, so use
whatever you can find. See build notes for precautions about polarity.
Can also use 5mm.
Can also use 5mm.
Can also use BS170 (rotate 180 degrees).
Can also use BS170 (rotate 180 degrees).
See build notes for switch settings.
See build notes for switch settings.
Switchcraft 112BX or equivalent.
Switchcraft 111X or equivalent.
Mouser 163-4302-E or equivalent.
Soft vinyl type. The hard-shell type will not fit.
Can also use a Hammond 1590N1.
4