Dobinsons BU63-3523 설치 매뉴얼 - 페이지 4

{카테고리_이름} Dobinsons BU63-3523에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dobinsons BU63-3523 13 페이지. Bullbar for vw amarok

Fitting Guide

1. Remove the number plate.

2. Remove all screws and bolts holding the lower

section of the bumper to the vehicle.

3. Align the template on the vehicle as seen

below NOTE: For models without flares fitted

the template will wrap around into the wheel

arch slightly.

4. Mark a line along the template edge on both

sides of the vehicles. The bottom edge will

align with the bottom edge of the bumper bar

grill recess.

5. Mask along the top side of the line marked in

step 4 to prevent scratching to the top side of

the bumper.

Dobinsons Springs and Suspension

6. On flared models it may be easier to remove

the flare sections attached to the bumper

before cutting.

7. Carefully using a pneumatic hacksaw or

equivalent cut along the marked lines in step

4, starting from the wheel arch edge first,

then along the line at the fog light recess,

then along the line at bumper bar grill recess

cutting through the grill vertical columns.

8. Carefully cut the flares if they have been

removed from the bumper, and re install to

vehicle.

9. Removed the burrs from the bumper and

flares and install the rubber pinch edging on

outside edges of the cut bumper.