Dobinsons BU63-3523 설치 매뉴얼 - 페이지 5

{카테고리_이름} Dobinsons BU63-3523에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dobinsons BU63-3523 13 페이지. Bullbar for vw amarok

10. Remove the lower section of the bumper.

11. Remove the foam bumper bar re-

enforcement section, and the plastic centre

cover plate.

12. Loosely fit the "L" shaped brackets (item no.3)

to the left and right side chassis brackets

(item no. 1) using the bolts, nuts and washer

supplied, as per page 3.

Dobinsons Springs and Suspension

13. Loosely Install both chassis & "L" shaped

brackets to the chassis fitting the nuts and

bolts to the front side of the brackets – you

will see that there are 2 holes that need to be

drilled through the chassis.

14. Install the U-bolts from the inside of the

chassis rails through the "L" shaped brackets

as per page 2 and install nuts and washers.

15. Tighten the 2 front bolts on each chassis

bracket.

16. Drill the remaining 2 bolts holes on the front

of each side mounting bracket to 13mm, paint

bare metal and install bolts, nuts and washers.