FlavorChef EP0030K 사용자 설명서 - 페이지 11
{카테고리_이름} FlavorChef EP0030K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. FlavorChef EP0030K 16 페이지. Express kitchen system
페이지 인쇄Travel Mug
(Green)
Tip
Start smoothies by pulsing a few times before blending on setting 2.
Travel Mug
1.
Connect the Blending Base to the Travel Mug:
1.1.
Align the Blending Base with the Travel Mug (see a. below).
1.2.
Screw the Blending Base into the Travel Mug to secure in place (see b. below).
!
The unit will not work unless the Travel Mug (with Blending Base attached) is fitted correctly onto
IMPORTANT
the Motor Housing.
Ensure the Travel Mug is fully screwed in to prevent contents from leaking.
2. Connect the Travel Mug (with Blending Base) to the Motor Housing by aligning the arrow on the Travel Mug
with the "unlock" graphic on the motor housing (see c. below).
3.
Turn the Travel Mug in the direction of the "lock" graphic (see d. below).
!
Never this attachment for processing meat or boiling liquid.
IMPORTANT
Never fill the Blending Jar past the MAX line marking.
4. Recommended Setting: "P" and then 2
NOTE: The total operating time should not be longer than 2 minutes.
The Pulse setting should not be used for longer thane 3-5 seconds at a time.
a
b
a
Suggested Use
• Green Smoothies
• Dairy Smoothies
• Milkshakes
WRONG
21
Blending Base
Motor Housing
c
d
a
RIGHT
Connecting the Master Jar to the Motor Housing
1.
Connect the Master Jar to the Motor Housing by aligning the arrow on the Master Jar with the "unlock"
graphic on the Motor Housing (see a. below).
2. Turn the Master Jar in the direction of the "lock" graphic (see b. below).
The Master Jar should now be fitted securely to the motor housing.
a
Connecting Attachments
•
Depending on the desired function, fit the required attachment within the Master Jar.
Fitting the Lid to the Master Jar
1.
Align the arrow on the Master Jar Lid with the unlock graphic on the Master Jar (see a. below).
2. Turn The Lid in the direction of the locking arrow (see b. below).
The Lid should now be securely fitted onto the Master Jar.
a
3. To insert the Pusher, slot it into the Chute (see c. below).
c
!
The unit will not work unless the Master Jar is fitted correctly to the Motor Housing AND the
IMPORTANT
Lid is fitted correctly to the Master Jar.
b
b
10