FlavorChef EP0030K Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Кухонная техника FlavorChef EP0030K. FlavorChef EP0030K 16 страниц. Express kitchen system

Печатать страницу
Travel Mug
(Green)
Tip
Start smoothies by pulsing a few times before blending on setting 2.
Travel Mug
1.
Connect the Blending Base to the Travel Mug:
1.1.
Align the Blending Base with the Travel Mug (see a. below).
1.2.
Screw the Blending Base into the Travel Mug to secure in place (see b. below).
!
The unit will not work unless the Travel Mug (with Blending Base attached) is fitted correctly onto
IMPORTANT
the Motor Housing.
Ensure the Travel Mug is fully screwed in to prevent contents from leaking.
2. Connect the Travel Mug (with Blending Base) to the Motor Housing by aligning the arrow on the Travel Mug
with the "unlock" graphic on the motor housing (see c. below).
3.
Turn the Travel Mug in the direction of the "lock" graphic (see d. below).
!
Never this attachment for processing meat or boiling liquid.
IMPORTANT
Never fill the Blending Jar past the MAX line marking.
4. Recommended Setting: "P" and then 2
NOTE: The total operating time should not be longer than 2 minutes.
The Pulse setting should not be used for longer thane 3-5 seconds at a time.
a
b
a
Suggested Use
• Green Smoothies
• Dairy Smoothies
• Milkshakes
WRONG
21
Blending Base
Motor Housing
c
d
a
RIGHT

Connecting the Master Jar to the Motor Housing

1.
Connect the Master Jar to the Motor Housing by aligning the arrow on the Master Jar with the "unlock"
graphic on the Motor Housing (see a. below).
2. Turn the Master Jar in the direction of the "lock" graphic (see b. below).
The Master Jar should now be fitted securely to the motor housing.
a

Connecting Attachments

•
Depending on the desired function, fit the required attachment within the Master Jar.

Fitting the Lid to the Master Jar

1.
Align the arrow on the Master Jar Lid with the unlock graphic on the Master Jar (see a. below).
2. Turn The Lid in the direction of the locking arrow (see b. below).
The Lid should now be securely fitted onto the Master Jar.
a
3. To insert the Pusher, slot it into the Chute (see c. below).
c
!
The unit will not work unless the Master Jar is fitted correctly to the Motor Housing AND the
IMPORTANT
Lid is fitted correctly to the Master Jar.
b
b
10