Docking Drawer 161102 설치 매뉴얼 - 페이지 5

{카테고리_이름} Docking Drawer 161102에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Docking Drawer 161102 5 페이지.

페이지 인쇄
Docking Drawer 161102 설치 매뉴얼
Reinstalling the Outlet–
Install the AC/USB charging outlet in the receptacle
box before plugging in the Docking Drawer.
­ ­
­
­
•­­ A fter­the­receptacle­box­has­been­correctly­installed­in­the­
REMINDER: IF THE CABLE ARM GROUND WIRE WAS REMOVED DURING
INSTALLATION, MAKE SURE IT HAS BEEN REATTACHED AND TORQUED
PROPERLY. MAKE SURE THE CIRCUIT BREAKER IS WIRED IN SERIES WITH
THE LINE (BLACK) WIRE AS SHOWN IN THE WIRING DIAGRAM.
•­ ­ F ollow­the­AC/USB­charging­outlet­instructions­(included­in­outlet­packaging)­
and­connect­the­black,­white,­and­green­wires­in­accordance­with­those­
instructions.

Specifications–

Docking­Drawer
­Technical­Specifications:
™
•­ AC­Power:­125V,­tamper­resistant­NEMA­5-15R­duplex­receptacle.
•­ ­ D C­(USB)­Power:­5.2V,­12.5W­duplex­USB­charging­­ r eceptacle­with­
integrated­­ o n/off­safety­switch.
•­ ­ M ax­rated­current­@­125­VAC:­3A.­Circuit­is­protected­by­5A­pop­­ o ut­
breaker­accessible­from­the­user­side.­Designed­for­charging­personal­
electronic­devices­only.

Wiring Diagrams–

Operation–

•­ ­ I nstructions­specific­to­the­USB­charging­outlet­are­
included­with­the­outlet­itself.
•­ ­ T he­Docking­Drawer­includes­a­5A­resettable­circuit­
breaker.­Breaker­trip­is­indicated­by­the­white­button­
protruding­approximately­3/8"­out­from­the­housing.­
To­reset,­correct­the­source­of­over­current­and­push­
the­white­button­back­in.
back­of­the­drawer­and­(if­applicable)­all­wires­correctly­
reattached,­the­AC/USB­charging­outlet­can­be­installed.­
Receptacle Box Wiring
Green Wire (ground):
green screw
White Wire (neutral):
silver screw
Black Wire (line):
brass screw
5