DOCKTECK DD0003 사용자 설명서 - 페이지 7

{카테고리_이름} DOCKTECK DD0003에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOCKTECK DD0003 7 페이지. 7-in-1 usb-c hub

Type-C to HDMI(4k/60Hz)/USB-AX2/SD/TF/RJ45/PD Charging with DP1.4 Alt mode

Dear Customer,

Have a nice day! Thank you for your purchase. Here are some tips for you to get

the most out of our product:

1. We suggest connecting the hub to the main device first, and then connect the

accessories to the ports.

2. The 4K@60Hz is only available for laptops with DisplayPort 1.4 and 8K

enabled. 60Hz only supports the 8 devices: Macbook Air 13"2020, Macbook Pro

15" 2019/2018, Macbook Pro 16" 2019, iPad Pro 12.9" 2020/2018, iPad Pro 11"

2020/2018.

3. You could charge an iPhone by the USB 3.0 interface, but please note the USB

ports are mainly intended for data transmission and do not support charging

high-power phone power.

4. If you can't get the Ethernet port to work, please reinstall the Ethernet driver,

or try this device with a different computer/ethernet cable and see if the issue

persists.

5. In order to effectively reach 1 Gbps network, please use CAT5E standard and

above Ethernet cable.

6. If you can't get the HDMI port to work, please try some of the following steps:

1) Confirm if the connected USB-C port of your device supports DP Alt Mode. To

do this, please consult your device's user manual, contact the seller, or check

the manufacturer's website.

2) Try a different computer and HDMI cable to see if the issue still persists.

3) Plug your HDMI cable directly into your device and see if you get a stable

connection. If you can't get a stable connection, then the problem is with your

HDMI cable.

4) Verify that your monitor is configured to the correct input (HDMI).

7. If you want the hub work with iPad Pro, you must update to the latest version

of the iPad OS.

8. Due to the power output limitations of some laptops, it is recommended that

you connect only one HDD / SDD at a time.

9. USB 3.0 interferes 2.4GHz WiFi and other wireless devices due to the similar

frequencies. According to Microsoft, the problem occurs only for the 2.4GHz

wireless band, but not for 5GHz. Please set your router as 5GHz to avoid the

problem.

10. We recommend using a 100W PD(Power Delivery) charger: 92W for

charging the connected laptop and 8W for powering the hub.(Tips: The USB-C

PD port, without data function).

Should you have any questions or difficulties, feel free to contact us, and we will

resolve them for you as soon as possible and we will do everything we can to

help.

We look forward to seeing you again.

Sincerely,

Dockteck Team