eta eHACK 사용 설명서 - 페이지 8

{카테고리_이름} eta eHACK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. eta eHACK 20 페이지. Flue gas recirculation
eta eHACK에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

Mounting the discharge electrode

Carefully insert the discharge electrode into the flue

duct so that it is not bent.

Fig. 2-18: Discharge electrode

Secure the discharge electrode with a washer and

screw.

Fig. 2-19: Washer and screw

The electrode must be in the centre of the precipitator,

so that the flue gas can be optimally cleaned.

Therefore, check the clearance of the electrodes to the

inner walls.

Fig. 2-20: Electrode

With the long nuts on the support of the high-voltage

unit, the alignment of the electrode can be adapted as

required. Once the alignment is correct, tighten the

screws.

Fig. 2-21: Adjusting the orientation with the long nuts

www.eta.co.at

Installation