eta eHACK Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} eta eHACK. eta eHACK 20 pagina's. Flue gas recirculation
Ook voor eta eHACK: Gebruiksaanwijzing (8 pagina's)

Pagina afdrukken

Mounting the discharge electrode

Carefully insert the discharge electrode into the flue

duct so that it is not bent.

Fig. 2-18: Discharge electrode

Secure the discharge electrode with a washer and

screw.

Fig. 2-19: Washer and screw

The electrode must be in the centre of the precipitator,

so that the flue gas can be optimally cleaned.

Therefore, check the clearance of the electrodes to the

inner walls.

Fig. 2-20: Electrode

With the long nuts on the support of the high-voltage

unit, the alignment of the electrode can be adapted as

required. Once the alignment is correct, tighten the

screws.

Fig. 2-21: Adjusting the orientation with the long nuts

www.eta.co.at

Installation