Fleetminder platinum nxtg 설치 매뉴얼 - 페이지 4

{카테고리_이름} Fleetminder platinum nxtg에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fleetminder platinum nxtg 12 페이지.

2. Find a suitable location for the Device.

• For installation and troubleshooting the 3 LED indicators should

be visible.

• Keeping in mind that the unit should be located as far away from

other electronic devices as possible. Eg. Radio, ECU...

Please note: If the unit is close to the radio, it may get GSM signal feedback

through the stereo system.

• The wiring has to be close to a power supply, otherwise the wires

may need to be extended.

• 3 metre length wire is included.

• Suggested installation locations include; under the dash, but

away from the stereo or the ECU, or in the Boot away from

speakers or any other electronic equipment.

• Please ensure that the unit is kept away from a moist and dusty

environment.

3. Fit the GPS/GPRS abtenna in a suitable location

• Keeping in mind that the GPS antenna needs a clear view of the

sky, and can't be obstructed by metal.

• T he antenna should be mounted flat side down.

(Plastic facing upwards)

• A good location is far under the dash next to heater vents, or on

the rear parcel shelf (for stealth, hide the antenna).

• Make sure that no cables get crimped during installation.

• Make sure there is enough cable length to reach the unit.

• Connect the gold connector from the GPS antenna to the gold

connector on the unit, making sure it is secured.

Page 2

fleetminder Installation Manual