DOD Dimension12 소유자 매뉴얼 - 페이지 4

{카테고리_이름} DOD Dimension12에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOD Dimension12 12 페이지.

FRONT PANEL FUNCTIONS

1. INPUT LEVEL KNOB controls the amount of signal that enters the D12

2. RECORD BUTTON engages the record function of the D12

3. PLAY BUTTON plays the sample in the D12's currently selected bank

4. STOP BUTTON stops the sample in the D12's currently selected bank

5. GATE/REVERSE activates the gate or enables sample to be played backwards. In

delay mode it engages reverse delay function.

6. STUTTER places a marker in the sample to return to every time the button is pushed

7. DATA WHEEL enables you to find specific points in the sample for easier editing. In

delay mode it selects delay time.

8. EDIT BUTTON enables you to place start/stop points within the sample

9. DISPLAY shows a numeric time index of the sample. In delay mode it shows

delay time

10. BANK 1 accesses 6 seconds of sampling in bank 1

11. BANK 2 accesses 6 seconds of sampling in bank 2

Selecting both bank 1 and bank 2 accesses 12 seconds of combined sampling

12. BANK 3 accesses 6 seconds of sampling in bank 3

13. BANK 4 accesses 6 seconds of sampling in bank 4

Selecting both bank 3 and bank 4 accesses 12 seconds of combined sampling

14. LOOP BUTTON Enables sample to start playing again when it reaches its end point.

When engaged the sample will play continuously until button is pressed again.

15. DELAY BUTTON Places D12 in delay mode

16. TAP TEMPO BUTTON Tapping this button in time with the music enables you to set

the delay time in time with the music.

17. EFFECT ON/OFF BUTTON Engages the LFO for effects ranging from subtle

chorusing to jetlike flanging.

18. SPEED KNOB Controls speed of LFO

19. DEPTH KNOB Controls depth of LFO

20. FEEDBACK KNOB Controls amount of feedback

21. MIX KNOB Blends between dry signal and effect

1. MIDI IN JACK Plug your MIDI controller in here (optional)

2. FOOTSWITCH INPUT Connect in the DOD FS3M here (optional)

3. A.C. ADAPTER INPUT Connect in the DOD PS750 in here

4. MONITOR OUTPUT Connect to mixer/pre-amp/amp input.

5. MAIN OUTPUT Connect to mixer/pre-amp/amp input.

6. MAIN INPUT (STEREO) Connect output from sample source here

7. MIC INPUT (HI-Z) Connect microphone here

15 16

Dimension12