DOD Dimension12 소유자 매뉴얼 - 페이지 6
{카테고리_이름} DOD Dimension12에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOD Dimension12 12 페이지.
3
Dimension12
RECORD
Select bank 1, 2, 3, or 4 (6 seconds each) or 1&2 or 3&4 (12 seconds
each) Press record button (record LED will light indicating record is
active). Press stop when done or wait until the full record time has fin-
ished. (Monitor out plays dry signal only.)
GATED RECORD
Select bank. Press gate button. Press record. Record LED flashes
waiting for input signal. Gate threshold is -25dB.
PLAY
Select desired bank, and press Play Button (3). If no edit point is set,
play will start at the beginning of the sample. If an edit point is set then
play will begin at specified start point. (Monitor out will play selected
bank only.)
LOOPING
Press the desired bank, press the Loop Button (14), (LED will light indi-
cating loop is active), press Play Button (3). The sample will play from
beginning to the end of the 6 or 12 second sampling time, depending
on which was selected. With looping on, the sound sample will then
continue to be repeated. If the start and stop points were changed
using the editing funtion, play will start from the new start point and end
with the new end point (see editing). Looping will continue to play
between the new start and stop points until the Stop Button (4) is
pressed.
REVERSE
The Gate/Reverse Button (5) will cause the sample to be played back-
wards. This function is used in play mode. To stop the reverse play-
back, press the Stop Button (4), and then press Gate/Reverse Button.
OVERLAYS
Two banks my be played back together, either bank 1 and 2 or 3 and
4. For example, this function my be accomplished by pressing bank 1
and the Play Button (3), and then pressing bank 2 and the Play Button
(3). Each bank can have its own set of above functions independently
associated with each bank, i.e., bank 1 for instance may be played in
reverse with effects, and its own separate stutter, while bank 2 can be
played forward with no effects and its own stutter point.