Etac Molift MRS Quattro 설치 매뉴얼 - 페이지 7

{카테고리_이름} Etac Molift MRS Quattro에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Etac Molift MRS Quattro 16 페이지.

6. Attach booms with mounted corners on to

the other two boom.

7. Tighten all the bolts and nuts with a spanner.

8. Make sure all bolts are properly thightened.

Secure that bolts are thightened prop-

erly. Loose bolts may cause collapse of

the Quattro when it is raised!

Assembly

Tip: Perpendicular frame.

If possible, use a tape measure to check that the

Quattro Frame is perpendicular.

1. Measure the diagonal length corner-to-corner.

The length shall be the same both ways.

2. If not; loosen the bolts and adjust.

3. When the readings is the same the frame is

square (or rectangle).

4. Tighten all bolts and nuts.

Warning for lifting of heavy loads.

Dropping the frame can cause

injury.

Mounting of legs, Ceiling height > 2,4 meter

1. Lift the Quattro frame at one side and fit legs

in the corners.

2. Use an Allen key to tighten the bolts for

fastening the legs

Note! Secure the boom and trolley

from running free. Use a strap or

tape.

Molift MRS Quattro / www.etac.com