Etac R82 Panda Futura 5 Standard 영어 매뉴얼 - 페이지 5

{카테고리_이름} Etac R82 Panda Futura 5 Standard에 대한 영어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Etac R82 Panda Futura 5 Standard 18 페이지.

페이지 인쇄

Service & maintenance information

Service and maintenance of a medical device is wholly the responsibility of the owner of that device.

Failure to service and maintain a device in accordance with the instructions may invalidate the device's warranty. Furthermore,

failure to service and maintain a device may compromise the clinical condition or safety of users and/or their caregivers. Do not

perform service and maintenance while the user is in the product. Contact the local dealer for assistance, if needed, in setting up,

using or how to perform service and maintenance of the device.

Lifetime

The lifetime of this product in normal use is 8 years if all

maintenance and servicing is carried out in accordance with

the manufacturer's instructions and demonstrably recorded.

The device may be reissued within its lifetime.

Service interval

The frequency of inspection may be altered depending upon

use and wear. It is recommended that the product is inspected

yearly, every time the product is re-issued for use and after

a long-term storage (more than 4 months). The inspection

should be carried out by a person who understands the use

of the product.

Service checklist:

Check and adjust the following as per their intended use:

• Back recline and the handle for locking the back in

position.

• Accessories can be inserted and locked in the fittings in

the top of the back, using the knob and handles mounted

in the fittings.

• Inserts for fittings in the back and seat is in good condition

• Nuts and bolts on the product are tightened

• Fittings and buckles for signs of worn out parts

• Product for cracks or signs for worn-out parts

• All labels on the product are intact

Repair or replace any damaged or worn out parts.

Maintenance

Before every use it is recommended to:

Wipe off any residue and dirt from the product, using a cloth

with warm water and a mild detergent/soap without chlorine

and let it dry before use carry out a visual inspection, for any

damaged or worn-out parts.

Washing

Main product

This product can be washed at 60° using a mild detergent

for 10 minutes in a washing machine designed for medical

devices. Use the machine's drying function to dry the product.

Unmount all accessories and wash them separately.

Fabric and covers

The cover can be washed at max. 40°C using a mild detergent

in a washing machine.

Separate foam and cover before wash.

Foam

The foam inserts must only be washed by hand. Use warm

water and a mild detergent/soap without chlorine and let all

parts dry before use.

During and after washing the foam, do not bend, squeeze or

wring it, as it may negatively affect the shape.

Handwash

This product and its accessories can also be washed by hand.

Use warm water and a mild detergent/ soap without chlorine

and let all parts dry before use.

Disinfection

The product can be disinfected with a 70% disinfectant IPA

solution. It is recommended to wipe off any residue and

dirt from the product, using a cloth with warm water and

a mild detergent/soap without chlorine and let it dry before

disinfection.

Materials

• Aluminium

• Plastic

• Stainless steel

• Steel

• Fabric

• Foam

Surface treatment

The following surface treatment processes were used to protect

against corrosion:

• Lacquered surfaces = Polyester powder coating or ED-

coating

• Non-lacquered aluminium parts = Anodized coating

• Non-lacquered steel surfaces = Galvanized