Etac R82 Panda Futura 5 Standard Посібник англійською мовою - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник англійською мовою для Допомога з мобільності Etac R82 Panda Futura 5 Standard. Etac R82 Panda Futura 5 Standard 18 сторінок.
Друкувати сторінкуService & maintenance information
Service and maintenance of a medical device is wholly the responsibility of the owner of that device.
Failure to service and maintain a device in accordance with the instructions may invalidate the device's warranty. Furthermore,
failure to service and maintain a device may compromise the clinical condition or safety of users and/or their caregivers. Do not
perform service and maintenance while the user is in the product. Contact the local dealer for assistance, if needed, in setting up,
using or how to perform service and maintenance of the device.
Lifetime
The lifetime of this product in normal use is 8 years if all
maintenance and servicing is carried out in accordance with
the manufacturer's instructions and demonstrably recorded.
The device may be reissued within its lifetime.
Service interval
The frequency of inspection may be altered depending upon
use and wear. It is recommended that the product is inspected
yearly, every time the product is re-issued for use and after
a long-term storage (more than 4 months). The inspection
should be carried out by a person who understands the use
of the product.
Service checklist:
Check and adjust the following as per their intended use:
• Back recline and the handle for locking the back in
position.
• Accessories can be inserted and locked in the fittings in
the top of the back, using the knob and handles mounted
in the fittings.
• Inserts for fittings in the back and seat is in good condition
• Nuts and bolts on the product are tightened
• Fittings and buckles for signs of worn out parts
• Product for cracks or signs for worn-out parts
• All labels on the product are intact
Repair or replace any damaged or worn out parts.
Maintenance
Before every use it is recommended to:
Wipe off any residue and dirt from the product, using a cloth
with warm water and a mild detergent/soap without chlorine
and let it dry before use carry out a visual inspection, for any
damaged or worn-out parts.
Washing
Main product
This product can be washed at 60° using a mild detergent
for 10 minutes in a washing machine designed for medical
devices. Use the machine's drying function to dry the product.
Unmount all accessories and wash them separately.
Fabric and covers
The cover can be washed at max. 40°C using a mild detergent
in a washing machine.
Separate foam and cover before wash.
Foam
The foam inserts must only be washed by hand. Use warm
water and a mild detergent/soap without chlorine and let all
parts dry before use.
During and after washing the foam, do not bend, squeeze or
wring it, as it may negatively affect the shape.
Handwash
This product and its accessories can also be washed by hand.
Use warm water and a mild detergent/ soap without chlorine
and let all parts dry before use.
Disinfection
The product can be disinfected with a 70% disinfectant IPA
solution. It is recommended to wipe off any residue and
dirt from the product, using a cloth with warm water and
a mild detergent/soap without chlorine and let it dry before
disinfection.
Materials
• Aluminium
• Plastic
• Stainless steel
• Steel
• Fabric
• Foam
Surface treatment
The following surface treatment processes were used to protect
against corrosion:
• Lacquered surfaces = Polyester powder coating or ED-
coating
• Non-lacquered aluminium parts = Anodized coating
• Non-lacquered steel surfaces = Galvanized
5
E
N