akpo WK-7 매뉴얼 - 페이지 6

{카테고리_이름} akpo WK-7에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. akpo WK-7 19 페이지.

Fig. 9

In order to connect the hood as an absorber, unscrew the curtain of the front outlet (Fig.9)

and remove it from the turbine (Fig.10). Then cut the curtain with scissors (along the

groove) (Fig.11 and Fig.12). The cut curtain must be placed into the hood turbine and

screwed on again (Fig.13 and Fig.14). Put the end plug on the upper outlet (Fig. 15); the

cleaned air is ejected through the front outlet openings of the hood.

ATTENTION:

If the hood is supposed to work as an absorber, do not remove

the air curtain used as the rear air outlet.