akpo WK-7 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Вентиляційна витяжка akpo WK-7. akpo WK-7 19 сторінок.

Fig. 9

In order to connect the hood as an absorber, unscrew the curtain of the front outlet (Fig.9)

and remove it from the turbine (Fig.10). Then cut the curtain with scissors (along the

groove) (Fig.11 and Fig.12). The cut curtain must be placed into the hood turbine and

screwed on again (Fig.13 and Fig.14). Put the end plug on the upper outlet (Fig. 15); the

cleaned air is ejected through the front outlet openings of the hood.

ATTENTION:

If the hood is supposed to work as an absorber, do not remove

the air curtain used as the rear air outlet.