Clinton 1020 조립 지침 - 페이지 2
{카테고리_이름} Clinton 1020에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton 1020 4 페이지. With adjustable backrest or non-adjustable top
페이지 인쇄ASSEMBLY INSTRUCTIONS FOR CLASSIC SERIES TREATMENT TABLES
MODELS 1010, 1020, 1030 & 1013 with ADJUSTABLE BACKREST/KD & Tables with pre-attached backrest
For MODELS 1010, 1020, 1030 & 1013 with NON-ADJUSTABLE TOP & PRE-ATTACHED TOPS begin assembly with STEP 4
Thank you for counting on Clinton to meet your medical
equipment needs by purchasing this fine equipment. All
Clinton equipment is designed and manufactured to pro-
vide years of dependable service because we want you as a
customer now and in the future. Below are easy to follow
instructions on how to properly assemble your equipment.
Please contact us at 800-441-9131 if you experience any
difficulty with the assembly or have questions.
INTENDED USE
Clinton treatment table, models 1010, 1020, 1030 & 1013,
are specifically designed and engineered for the use by a
single person at a time, who is attended to and observed
by trained medical personnel. Never leave anyone on the
table unattended. Person's weight and the combination
of force exerted on the table during treatment is not to
exceed a total of 400 lbs.
KD
Hardware Package
Quantity
(4)
1
/
" Truss Head Screws
1
2
(8)
1" Truss Head Screws
(8)
/
" Washers
5
16
(4)
/
" Nuts
5
16
(2)
2
/
" Pan Head Screws
1
4
(2)
/
" Barrel Bolts
3
4
(4)
1
/
" Truss Head Screws (1030 & 1013)
1
4
Tools Required
Phillips Screwdriver and Adjustable Wrench
IF TOP IS ATTACHED TO FRAME, SKIP TO STEP 4
Place the upholstered sections on a flat surface
1
with the foot end on the left and fabric tag
toward the center of the table as shown. Place
the head end on right with hinge toward the center of the
table. Place frame on top with channel, teeth down, above
the head end.
FOR MODELS WITH ADJUSTABLE BACKREST
fabric tag
MAXIMUM WEIGHT CAPACITY 400 LBS
Pre-Attached
Quantity
(4)
(0)
(4)
(4)
(2)
(2)
(4)
center hinge
teeth
Align the holes in the hinge with the holes in
2
the center board and fasten to center board
using 4 silver, 1" truss head screws.
FOR MODELS WITH ADJUSTABLE BACKREST
Finger tighten the top's foot end to frame using
3
4 silver, 1" truss head screws and
Slide the foot end toward the center board and
finish tightening screws.
FOR MODELS WITH ADJUSTABLE BACKREST
/
" washers.
5
16