Clinton 84100 사용자 설명서 - 페이지 5

{카테고리_이름} Clinton 84100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton 84100 11 페이지. Bariatric open base power tables combine load and force capacity: 550 lbs. (249 kg)

페이지 인쇄

UNPACKING & SETUP

All Clinton Bariatric Open Base Power Tables ship fully assembled. However, care should be taken when unpack-

ing the table so as not to damage the equipment.

BEFORE STARTING TO UNPACK THE EQUIPMENT inspect the boxes for damage that may have occurred during

the shipping process. Clinton uses every packaging option available to insure that equipment arrives at its

destination in factory condition, however, Clinton Industries has no control over third party handling once it

leaves our facilities. Report any visible damage to Clinton and the shipping carrier immediately.

After the package is inspected for visible damage, follow the unpacking steps below.

CAUTION:

Do not use a knife or other sharp object that may puncture or damage the upholstery

during the unpacking process.

CAUTION:

Clinton Open Base Power Tables are heavy. Clinton Industries recommends four

reasonably strong individuals using proper lifting techniques be used to lift or move the table.

Not using the recommended number of movers may result in injury to the persons attempting to lift

or move the equipment.

CAUTION:

extended stirrups for lifting the table. This could result in damage to the stirrups or table, and may result in injury

to the individuals attempting to move or lift the table.

UNPACKING THE POWER TABLE

1. Remove any strapping and

cardboard lid

2. Remove wooden post supports

from each corner.

3. With help, lift main cardboard

surround off the table.

4. Pull corners of cardboard tray

apart so tray is flat.

5. With the assistance of one or

more persons, lift power table

off skid and into position.

Always lift the table by the metal frame. If table is equipped with stirrups, never used the