Clinton Electronics CE-M32A-PIR 기본 설정 매뉴얼 - 페이지 4
{카테고리_이름} Clinton Electronics CE-M32A-PIR에 대한 기본 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton Electronics CE-M32A-PIR 9 페이지. Pvms w/ axis m3065
Clinton Electronics CE-M32A-PIR에 대해서도 마찬가지입니다: 기본 설정 매뉴얼 (7 페이지)
페이지 인쇄
SYSTEM SETTINGS/Special Control – Message & LED Control
Press the 'MENU' button on the included remote or the buttons located on the back of the PVM to adjust menu
settings. Navigate up/down through the menu, press Enter to select an option and left/right to make adjustments.
Press the Exit button to escape from a menu option and to exit the OSD menu.
Language
OSD Timer
OSD Transparency
Recall
Key Lock
Message Control
Camera
On/O :
Turn the text overlay message ON or OFF.
Message:
Choose a 'text overlay' message that will display on the screen. Choose from: Recording in Progress,
Welcome, Grabacion en Progresso, or Bienvenida. There are also two selections that alternate the English and Spanish
versions of these messages (Message Flash time interval must be set for these selections).
Message Position:
Set the message at the TOP or BOTTOM of the screen.
Message Flash:
Set the time interval that the message fl ashes on/o the screen. If set to OFF the message will not
fl ash, it will always remain on the screen.
LED Control:
Turn ON or OFF the fl ashing LED located on the front of the PVM.
PLEASE RETURN TO CASHIER:
displayed on the screen when triggered by the Alarm Input.
Message
Flashing LED
Basic Setup Guide: "A-Series" PVMs w/ AXIS 3065 Camera
11.21.22
System Settings
:
English
:
30
Sec.
:
:
No
:
No
1920x1080@30Hz
Set the duration that the fl ashing "PLEASE RETURN TO CASHIER" message will be
On/O
Message
0
Message Position
Message Flash
LED Control
PLEASE RETURN TO CASHIER
Camera
EXAMPLE:
4
System Settings
:
:
RECORDING IN...
:
:
:
:
:
1920x1080@30Hz
On/O :
ON
Message:
Recording in Progress
Message Position:
BOTTOM
Message Flash:
3 sec
LED Control:
ON
Information in this document is subject to change without notice.
On
Bottom
3
Sec.
O
1
Sec.