Clinton Electronics CE-M32A-PIR 기본 설정 매뉴얼 - 페이지 3
{카테고리_이름} Clinton Electronics CE-M32A-PIR에 대한 기본 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clinton Electronics CE-M32A-PIR 9 페이지. Pvms w/ axis m3065
Clinton Electronics CE-M32A-PIR에 대해서도 마찬가지입니다: 기본 설정 매뉴얼 (7 페이지)
페이지 인쇄
DISPLAY – Image Modes
Switch HDMI:
The screen will switch back-and-forth
from the HDMI input to the camera image at set time
intervals
Camera VOV Switch:
The screen will display the SD
Card content in the corner of the screen at set time
intervals over the camera image.
Alarm VOV:
SD Card content will be full screen until
triggered by the Alarm Input— when triggered, a
"Return to Cashier" message will fl ash on the screen.
SD CARD
• CE-M10A-A does not include SD Card Player!
• Image Mode options & names vary by model.
Basic Setup Guide: "A-Series" PVMs w/ AXIS 3065 Camera
11.21.22
*continued
Switch SD Video:
forth from the camera image to the SD Card content at
set time intervals.
SD CARD
Motion VOV:
no motion, when motion is detected by the PIR sensor
the SD Card content will be shown over the camera in
the corner of the screen.
SD CARD
Alarm:
The camera image will be on the screen until
triggered by the Alarm Input— when triggered, a
"Return to Cashier" message will fl ash on the screen.
3
The screen will switch back-and-
The camera image will be full screen with
Information in this document is subject to change without notice.
SD CARD