Clinton Electronics CE-M32A-PIR Manual de configuração básica - Página 3
Procurar online ou descarregar pdf Manual de configuração básica para Câmara digital Clinton Electronics CE-M32A-PIR. Clinton Electronics CE-M32A-PIR 9 páginas. Pvms w/ axis m3065
Também para Clinton Electronics CE-M32A-PIR: Manual de configuração básica (7 páginas)
Imprimir página
DISPLAY – Image Modes
Switch HDMI:
The screen will switch back-and-forth
from the HDMI input to the camera image at set time
intervals
Camera VOV Switch:
The screen will display the SD
Card content in the corner of the screen at set time
intervals over the camera image.
Alarm VOV:
SD Card content will be full screen until
triggered by the Alarm Input— when triggered, a
"Return to Cashier" message will fl ash on the screen.
SD CARD
• CE-M10A-A does not include SD Card Player!
• Image Mode options & names vary by model.
Basic Setup Guide: "A-Series" PVMs w/ AXIS 3065 Camera
11.21.22
*continued
Switch SD Video:
forth from the camera image to the SD Card content at
set time intervals.
SD CARD
Motion VOV:
no motion, when motion is detected by the PIR sensor
the SD Card content will be shown over the camera in
the corner of the screen.
SD CARD
Alarm:
The camera image will be on the screen until
triggered by the Alarm Input— when triggered, a
"Return to Cashier" message will fl ash on the screen.
3
The screen will switch back-and-
The camera image will be full screen with
Information in this document is subject to change without notice.
SD CARD