Clipcomm BS-A101 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} Clipcomm BS-A101에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clipcomm BS-A101 13 페이지. Clipcomm bs-a101 voip phone quick start guide

Chapter4. How to Use Bluetooth Headset Audio Gateway

Function

This chapter explains how to use the Bluetooth Headset Audio Gateway function of the BS-

A101. In this guide, it is assumed that the BS-A101 is in its factory-reset state. For more

details of the VoIP Phone function of the BS-A101, please refer to the CP-101B user's manual.

IP to IP call mode is supported as default. If you want to connect your BS-A101 to a

Gatekeeper, please refer to the CP-101B user's guide for more detailed VoIP configuration.

4.2. BS-A101 & Headset Audio Gateway

BS-A101 has the Bluetooth Headset Audio Gateway Function. When an external call is

received, BS-A101 will deliver the call to the headset. You can also make a call to recently

placed number using the headset.

In order to use the headset audio gateway function, BS-A101 must have a registered headset.

① Set your headset at 'registration ready state' as explained in your headset manual

② Set your BS-A101's PIN code to be the same as the one in your headset (which is

normally '0000' but you should consult with the user manual of your headset for its

exact default PIN code)

③ Register your headset to your BS-A101 by pressing MENU

A101 begins inquiry procedure. After successful inquiry, select your headset's

BD_ADDRESS (Bluetooth Device Address) from the list of found devices.

④ When you select one, 'pairing' process will be automatically performed.

⑤ If you do pairing again manually, connect to your headset by pressing MENU

After this, 'pairing' process is performed and your headset sets the BS-A101 as its

audio gateway. After successful pairing, you should press END and then all the pairing

process completes.

5. Then, your BS-