DOEPFER A-103 VCF 6 매뉴얼 - 페이지 4

{카테고리_이름} DOEPFER A-103 VCF 6에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOEPFER A-103 VCF 6 6 페이지. System a - 100

A-103 18dB Low Pass

4. In / Outputs

! CV 1

Socket CV 1 is the filter's standard voltage control

input, and works on the 1V / octave rule, like the

VCOs.

If you patch a modulation source (eg LFO, ADSR) to

this input,

the cut-off frequency of the filter will be

modulated by its voltage: ie., the sound color changes

according to the voltage put out by the modulator.

If you use the VCF as a sine wave oscillator, connect

the pitch CV into this socket. Do the same if you want

the filter's cut-off frequency to track exactly with the

pitch of a note (filter tracking).

" CV 2 • § CV 3

Sockets CV 2 and CV 3 are also voltage control

inputs for the filter. Unlike CV 1, you can control the

level of voltage - the intensity of modulation effect on the

filter - with attenuators 2 and 3.

System A - 100

$ Audio In

This is the filter's audio input socket. Patch in the

output from any sound source (eg. VCO A-110/A-111,

Sampler/Wavetable Oscillator A-112, Subharmonic Ge-

nerator A-113, Ring Modulator A-114, Audio Divider

A-115, Waveform Processor/Waveshaper A-116/ A-136,

Noise Generator A-117/118, external audio signal e.g.

via A-119, VC Divider A-163, mixed signal of different

audio sources using A-138 and so on).

% Audio Out

Filter output % sends out the filtered signal.

doepfer