ClipperCreek HCS SERIES 설치 매뉴얼 - 페이지 6
{카테고리_이름} ClipperCreek HCS SERIES에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ClipperCreek HCS SERIES 20 페이지. Quad-mount kit.
innovative infrastructure for
electric and hybrid vehicles
ClipperCreek HCS SERIES에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지)
페이지 인쇄HCS QUAD PEDESTAL KIT INSTALLATION GUIDE
ClipperCreek
TOOLS REQUIRED FOR ASSEMBLING THE QUAD
, Inc.
PEDESTAL KIT (HCS Series EVSE)
The following tools are required for the installation and assembly of the pedestal components.
•
L-shape T27 Torx Driver, in a variety of lengths for faster assembly. (Alternatively, a ratcheting driver
can be used. If using a powered screwdriver, set it to a low torque value.)
•
#2 Phillips Head Screwdriver
•
5/16" Hex Head Wrench
•
Box Wrench (appropriately sized for the Anchor Nuts)
•
Preferred tool to cut flexible conduit
•
Tape measure
Page 6