DOF FREEDOM X5 사용자 설명서 - 페이지 16

{카테고리_이름} DOF FREEDOM X5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DOF FREEDOM X5 20 페이지. Camera moving model scanner

User manual

Additional Scans and Edit

After completing the base scan, move the 3D data shown on the screen for additional

❶

scan in the unscanned area.

Additional scanning methods

❷

• Drag while holding down the left mouse button for additional scan.

• Click the Additional Scan button in the Edit menu for additional scan.

• Press the 'S' button on the keyboard for additional scan.

You can remove unnecessary parts by pressing the Trim button in the Edit menu.

❸

Once everything is done, click the Complete button to move to the next step.

❹

Scanning Instructions

Click!

Prep Scan

Once the base scan is completed, proceed to the prep scan step.

❶

Please remove adjacent teeth excluding abutment teeth.

For bridge cases, number information about the abutment to be scanned appears on

the left side of the live view. Leave the prep as per the information and remove the

remaining models. Select the prep to be scanned in live view.

On the live view screen, left-click to select the prep to be scanned.

❷

The circular border can be adjusted larger/smaller by scrolling the mouse.

The prep must be placed within the circular border and scanning outside the

circular border will not occur.

Once you have finished specifying the prep scan area, press the scan button to

❸

proceed with the scan.

Once the prep scan is complete, preceed to further scanning and editing steps.

❹

Scan additional parts you need or edit unnecessary parts.

After completion, press OK button to move to the next step.

❺

Scanning Instructions