Dog Runner Tracks 사용자 설명서 - 페이지 10

{카테고리_이름} Dog Runner Tracks에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dog Runner Tracks 18 페이지.

MAINTENANCE

Running Belt Adjustment

If the running belt is not in the center, stop the treadmill then adjust the Hex Screw in the Rear End

Cap by the Hex Wrench. For example, if the running belt is moving towards the left side, turn the left

Hex Screw about 1/4 circle (clockwise). If the running belt is moving towards the right side, turn the

right Hex Screw about 1/4 circle (clockwise). Turn on the treadmill after it has been adjusted. If you

find that the belt does not move to the proper position, please repeat above steps. Do not use the

treadmill until the running belt returns to the center position.

(Ps.1. This action is very important, if the belt is not in the center, be sure to follow above steps.)

(Ps.2. The position of the running belt might not stay precisely in the center with slightly towards the

left or right side, and the situation varies with how end-users use and the weight of end-users. No

need to adjust the belt if it does not rub against the parts aside.)