Dog trace d-control easy 서비스 지침 매뉴얼 - 페이지 8
{카테고리_이름} Dog trace d-control easy에 대한 서비스 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dog trace d-control easy 18 페이지. Electronic training collar
페이지 인쇄
Turning ON/OFF
TURNING THE REMOTE CONTROLLER ON/OFF
Turning on: Press down for 1 second the black
Turning on is indicated by a sound signal and by a fl ashing green LED.
Turning off : Again, press down for 1 second the black
Switching off is indicated by a sound signal and the green LED stops fl ashing.
CAUTION: To save the service life of the battery, the transmitter will be automatically
turned off after 120 minutes of inactivity.
TURNING THE RECEIVER (COLLAR) ON/OFF
The magnetic switching system located in the remote controller is used to turn the receiver (collar)
on and off .
Turning on: Touch the lower part of the remote controller for 1 second to the target on the
receiver (refer to the Fig.). The receiver indicator will start fl ashing green and this indicates that
the receiver is ready for use.
Turning off : Again, touch the lower part of the
remote controller for 1 second to the target on the
receiver (see the Fig.). The LED indicator of the
receiver will shine red. The receiver is turned off .
To enhance the service life of the battery, it is necessary
to turn off the receiver always after training is fi nished.
If the receiver is not used for a longer period of time,
we recommend you to remove the battery from it.
8
On/Off button on the remote controller.
On/Off button.
The situation when the receiver is turned on/off
and the transmitter is being matched with the receiver