Dogtra 1500NCP Series 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Dogtra 1500NCP Series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra 1500NCP Series 18 페이지. Remote controlled dog training collars
Dogtra 1500NCP Series에 대해서도 마찬가지입니다: 설정 매뉴얼 (6 페이지)

페이지 인쇄

CHARGING THE BATTERIES

Battery Charging Procedure

1. Attach the charging cables to both the

transmitter and receiver(s), as shown on

page 20.

2. Plug the charger into a 120-volt wall outlet

or, if using the accessory field charger,

plug into a cigarette lighter. (Use a 230-

volt European charger for Europe.) When

properly plugged in, all indicator lights

should glow red.

The receiver automatically turns off when

you insert the charging cable into the

battery-charging receptacle on the receiver.

3. After charging, cover the battery charging

receptacles with the rubber plugs on the

transmitter and receiver.

4. The battery is fully charged with a 14-hour

charge. The lights will stay red during the

charging process. They DO NOT turn

green when fully charged. Charging the

batteries for more than 14 hours at one time

will not extend battery life.

TESTING YOUR

COLLAR

1. Turn the collar on by pressing the button

on the back side of the collar receiver.

The indicator light will come on for a

moment then blink once every two

seconds, showing that the collar is ready

to use. (If the indicator light is red, the

batteries need to be charged.) Place the

test light on the contact points of receiver

and hold it there.

TESTING