Dogtra 1500NCP Series Руководство пользователя - Страница 13
Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными Dogtra 1500NCP Series. Dogtra 1500NCP Series 18 страниц. Remote controlled dog training collars
Также для Dogtra 1500NCP Series: Руководство по настройке (6 страниц)
Печатать страницу
CHARGING THE BATTERIES
Battery Charging Procedure
1. Attach the charging cables to both the
transmitter and receiver(s), as shown on
page 20.
2. Plug the charger into a 120-volt wall outlet
or, if using the accessory field charger,
plug into a cigarette lighter. (Use a 230-
volt European charger for Europe.) When
properly plugged in, all indicator lights
should glow red.
The receiver automatically turns off when
you insert the charging cable into the
battery-charging receptacle on the receiver.
3. After charging, cover the battery charging
receptacles with the rubber plugs on the
transmitter and receiver.
4. The battery is fully charged with a 14-hour
charge. The lights will stay red during the
charging process. They DO NOT turn
green when fully charged. Charging the
batteries for more than 14 hours at one time
will not extend battery life.
22
TESTING YOUR
COLLAR
1. Turn the collar on by pressing the button
on the back side of the collar receiver.
The indicator light will come on for a
moment then blink once every two
seconds, showing that the collar is ready
to use. (If the indicator light is red, the
batteries need to be charged.) Place the
test light on the contact points of receiver
and hold it there.
TESTING
23