Dogtra ARC HANDSFREE 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Dogtra ARC HANDSFREE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra ARC HANDSFREE 19 페이지. Remote controlled dog training collars
Dogtra ARC HANDSFREE에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

페이지 인쇄

1. Handsfree Information

10. Attaching the Belt Clip

Follow the instructions below to attach the included belt

clip to the transmitter.

1. Align the belt clip to the grooves on the back of the

transmitter.

2. With a firm grip, screw on the belt clip's Phillips head

screws with a screwdriver.

Caution

Tighten until firmly in place. Be careful not to over

tighten.

11. Using the Test Light

1. To turn on the receiver, place the red dot on the back of

the transmitter to the red dot on the receiver. Hold the

two red dots together for a moment until the LED light

on the receiver comes on. The indicator light will come on

for a moment then blink once every 4 seconds, showing

that the receiver is ready to use (the receiver needs to be

charged if the indicator light is red).

2. Turn the transmitter on by holding down the on/off

button on the right side of the transmitter. The LED will

blink every 4 seconds and the LCD screen will show

the remaining battery life (the transmitter needs to be

charged if there is only 1 bar showing on the battery icon

for the LCD transmitter screen).

3. Place the test light, included in the package contents, on

the contact points as shown in the diagram.

4. Watch the test light as you press the Nick button on the

transmitter. It should light up for just a moment. The

higher the intensity, the brighter the test light will be.