Dogtra ARC HANDSFREE Owner's Manual - Page 14
Browse online or download pdf Owner's Manual for Pet Care Product Dogtra ARC HANDSFREE. Dogtra ARC HANDSFREE 19 pages. Remote controlled dog training collars
Also for Dogtra ARC HANDSFREE: Owner's Manual (16 pages)
Print Page
10. Attaching the Belt Clip
Follow the instructions below to attach the included belt
clip to the transmitter.
1. Align the belt clip to the grooves on the back of the
transmitter.
2. With a firm grip, screw on the belt clip's Phillips head
screws with a screwdriver.
Caution
Tighten until firmly in place. Be careful not to over
tighten.
24
11. Using the Test Light
1. To turn on the receiver, place the red dot on the back of
the transmitter to the red dot on the receiver. Hold the
two red dots together for a moment until the LED light
on the receiver comes on. The indicator light will come on
for a moment then blink once every 4 seconds, showing
that the receiver is ready to use (the receiver needs to be
charged if the indicator light is red).
2. Turn the transmitter on by holding down the on/off
button on the right side of the transmitter. The LED will
blink every 4 seconds and the LCD screen will show
the remaining battery life (the transmitter needs to be
charged if there is only 1 bar showing on the battery icon
for the LCD transmitter screen).
3. Place the test light, included in the package contents, on
the contact points as shown in the diagram.
4. Watch the test light as you press the Nick button on the
transmitter. It should light up for just a moment. The
higher the intensity, the brighter the test light will be.
25