Dogtra Edge 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Dogtra Edge에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra Edge 20 페이지. Remote controlled dog training collars
Dogtra Edge에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지), 제품 설명서 (14 페이지), 소유자 매뉴얼 (19 페이지), 코드 설정 매뉴얼 (2 페이지)
6. The LED indicator
The LED indicator flashes every 4 seconds when the
receiver is on and ready for use. The LED indicator will
blink on both the transmitter and the receiver when the
transmitter buttons are pressed.
The LED indicator color indicates the battery life level.
Green = Fully charged
Amber = Medium
Red = Needs charging
If the unit is used while the LED indicator is red, it will shut
down automatically.
7. Charging the battery
1. Lift the rubber-charging cap and plug in the charger.
2. Plug the adapter's power plug in to a standard AC
wall outlet, The LED indicator on the transmitter and
receiver/collar will turn red.
3. When the unit is fully charged, the LED indicator will
turn green on both the transmitter and receiver/collar.
Unplug the adapter's power plug from the AC wall
outlet and disconnect the charger from the unit.
16
4. Place the rubber-charging cap back over the charging
port.
* The transmitter and receiver/collar rubber-charging cap
ensures dirt and debris does not build up in the charging
port area. The unit is waterproof even if the rubber-
charging cap is not fully closed.
To charge multiple receiver/collars and a transmitter,
combine additional battery charger splitter cables as
shown.
Warning
1. Fully charge the unit before the first use.
2. Do not charge the unit near any flammable
substances.
3. Fully charge the unit before storing for one month
or longer.
4. Always use Dogtra approved charging adapters.
When the wrong charging adapter is used, the LED
indicator will not turn on or blink amber.
17