Dogtra Edge 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Dogtra Edge에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dogtra Edge 20 페이지. Remote controlled dog training collars
Dogtra Edge에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지), 제품 설명서 (14 페이지), 소유자 매뉴얼 (19 페이지), 코드 설정 매뉴얼 (2 페이지)

페이지 인쇄

8. How to change the stimulation intensity

The Dogtra EDGE has the ability to switch between the

rheostat/volume intensity and the selector/step intensity.

The EDGE unit comes installed with the rheostat dial knob

in place. To switch to the selector/step dial, follow the

steps below.

1. Turn the stimulation level to 0.

2. Unscrew the top of the dial with a flathead screwdriver

counterclockwise.

3. Remove the current dial knob and replace with the

desired intensity dial type.

4. While firmly holding the dial knob in place, tighten the

screw clockwise.

Next, change the program setting to the corresponding

intensity dial type.

To change the program setting, follow the steps below.

Push

simultaneously

4. The display on the LCD screen will now show the

icon for the rheostat/volume or the selector/step.

Repeat the steps from the beginning, to switch back

and forth from the rheostat/volume and the

selector/step style of intensity control.

Icon for the rheostat/volume

1. Set the transmitter's

intensity dial to 0.

2. Set the mode dial to

"P".

3. Simultaneously hold

down the black button

on the front of the

transmitter, along with

the on/off blue button

on the back of the

ransmitter.

Icon for the selector/step