Aseptico ADC-09CF 운영 매뉴얼 및 부품 목록 - 페이지 4

{카테고리_이름} Aseptico ADC-09CF에 대한 운영 매뉴얼 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. Aseptico ADC-09CF 12 페이지. Portable hydraulic dental stool/kit

SETTING UP THE STOOL:

1. Remove the stool components from the soft

case. Note that the Gas Cylinder is stowed on

the bottom of the Seat in a protective vinyl

sleeve. Place your hand under the wide (front)

edge of the Seat while lifting to keep the Gas

Cylinder from falling and causing injury.

Fig.1 - Stool Components

BASE

ASSEMBLY

2. Remove Gas Cylinder from vinyl sleeve and

place the small end in the socket on the bot-

tom of the Seat Assembly (Fig. 2). Lift slightly

to check that Seat Latch holds the Gas

Cylinder.

Fig.2 - Attaching Cylinder to Seat

SEAT

LATCH

3. Turn Seat and Gas Cylinder Assembly over

and insert bottom of Gas Cylinder into socket

in center of Base. Straighten the Gas Cylinder

as required to have it seat all the way into the

Base then pull the ring on the Base Latch until

the Gas Cylinder drops in place; release the

Base Latch ring (Fig. 3).

ADC-09CF / ADC-09S

GAS

SEAT

CYLINDER

ASSEMBLY

Fig.3 - Attaching Seat/Cylinder to the Base

4. Rotate the Backrest to the upright position (Fig

4).

Fig. 4 - Backrest Positioning

5. Before using, lift the stool from the Seat to

check that all three components are latched

together (Fig. 5).

Fig.5 - Test connections

LIFT FROM

SEAT

ASSEMBLY

CYLINDER

ASSEMBLY

BASE

ASSEMBLY