Aseptico ADC-09CF Bedieningshandleiding en onderdelenlijst - Pagina 4
Blader online of download pdf Bedieningshandleiding en onderdelenlijst voor {categorie_naam} Aseptico ADC-09CF. Aseptico ADC-09CF 12 pagina's. Portable hydraulic dental stool/kit
Pagina afdrukken
SETTING UP THE STOOL:
1. Remove the stool components from the soft
case. Note that the Gas Cylinder is stowed on
the bottom of the Seat in a protective vinyl
sleeve. Place your hand under the wide (front)
edge of the Seat while lifting to keep the Gas
Cylinder from falling and causing injury.
Fig.1 - Stool Components
BASE
ASSEMBLY
2. Remove Gas Cylinder from vinyl sleeve and
place the small end in the socket on the bot-
tom of the Seat Assembly (Fig. 2). Lift slightly
to check that Seat Latch holds the Gas
Cylinder.
Fig.2 - Attaching Cylinder to Seat
SEAT
LATCH
3. Turn Seat and Gas Cylinder Assembly over
and insert bottom of Gas Cylinder into socket
in center of Base. Straighten the Gas Cylinder
as required to have it seat all the way into the
Base then pull the ring on the Base Latch until
the Gas Cylinder drops in place; release the
Base Latch ring (Fig. 3).
4
ADC-09CF / ADC-09S
GAS
SEAT
CYLINDER
ASSEMBLY
ASSEMBLY
Fig.3 - Attaching Seat/Cylinder to the Base
4. Rotate the Backrest to the upright position (Fig
4).
Fig. 4 - Backrest Positioning
5. Before using, lift the stool from the Seat to
check that all three components are latched
together (Fig. 5).
Fig.5 - Test connections
LIFT FROM
SEAT
SEAT
ASSEMBLY
CYLINDER
ASSEMBLY
BASE
ASSEMBLY