Clockaudio CDT100 사용자 설명서 - 페이지 9

{카테고리_이름} Clockaudio CDT100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clockaudio CDT100 17 페이지. Dante transporter
Clockaudio CDT100에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

CDT100 User Manual

4.2 – Device Identification

The device identification feature allows the user to see which device is physically being configured.

When the identify feature is active, the power LED on the active device will flash.

The Identify check box shows the state of the device identify feature. If the box is checked, the feature is active on the active unit.

If the check box is clear, the identify feature is inactive.

To change the state of the feature, simply click in the Identify check box to toggle its state from off to on or on to off.

The identify function will continue to operate until the function is turned off via the user interface or the device is powered down.

Clockaudio 2015