Aseptico AEU-20 운영 및 유지보수 매뉴얼 - 페이지 2
{카테고리_이름} Aseptico AEU-20에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aseptico AEU-20 12 페이지. Endodontic system
페이지 인쇄TABLE OF CONTENTS:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . .1
Package Contents . . . . . . . . . . . . . . . . . . . .1
Setting Up the Unit . . . . . . . . . . . . . . . . . . .2
Operation Functions . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . . . . . . . . .5
Sterilization . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance & Cleaning . . . . . . . . . . . . . . .7
Symbol Definition . . . . . . . . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . .8
Warranty . . . . . . . . . . . . . . . . . . .Back Cover
SPECIFICATIONS:
Console Size: 5.80" x 7.21" x 3.03"
(14.73 x 18.31 x 7.70 cm)
Console Weight: 3.5 lbs (1.59 kg)
Power Source: 110V/120V, 60 Hz, or
220V/250V, 50 Hz
Fuse: 0.315A - 110V
0.16A - 230V
Slo-Blo Type
CLASSIFICATIONS:
Class I
Type B Applied Parts
Ordinary Protection
Not suitable for use in the presence of a flam-
mable anaesthetic mixture mixed with air or
with oxygen or nitrous oxide.
Note: The power supply cord is the mains
appliance disconnect means.
P.O. Box 1548 • Woodinville, WA 98072
8333 216th Street SE • Woodinville, WA 98072
(425) 487-3157 (800) 426-5913
www.aseptico.com • [email protected]
To prevent injury to people and damage to property,
please heed relevant warnings and remarks. They
are marked as follows:
WARNING: Serious injury or death may result if
ignored.
CAUTION:
Damage to property or the environ-
ment may result if ignored.
NOTE:
Important additional information and
hints.
MEDICAL EQUIPMENT WITH
RESPECT TO ELECTRIC SHOCK,
FIRE, AND MECHANICAL HAZARDS
ONLY IN ACCORDANCE WITH UL
2601-1 CAN/CSA C22.2 No. 601.1
41EJ
WARNING: This device has been tested and found
to comply with the emissions requirements of IEC
60601-1-2:2001-09. These requirements provide
reasonable protection against harmful electromag-
netic interference in a typical medical installation.
However, high levels of radio-frequency (RF) emis-
sions from electrical devices, such as cellular
phones, may disrupt the performance of this device.
To mitigate disruptive electromagnetic interference,
position this device away from RF transmitters and
other sources of electromagnetic energy.