Aseptico AA-98 AirPac II 작동 및 유지보수 지침 매뉴얼 - 페이지 4

{카테고리_이름} Aseptico AA-98 AirPac II에 대한 작동 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aseptico AA-98 AirPac II 8 페이지. Operation and maintenance instruction manual for compressor 220v

페이지 인쇄

SET-UP & OPERATION

1. Unpack the compressor and locate the

remote power cord.

2. Plug the power cord into the receptacle on

the outside of the unit and then into a

grounded power outlet.

3. To activate the AA-98 compressor, flip the

power switch to the on (I) position. Once

powered, the compressor will start and stop

automatically to maintain pressure. The

pressure switch is factory adjusted to

properly start and stop. The cooling fan will

operate continuously.

4. After plugging the compressor in and turning

it on, let the compressor run until it stops,

indicating full pressure.

5. Locate the 1/4" quick disconnect air outlet

and pressure gauge on the end of the

compressor case. Connect a 1/4" male

coupling from your equipment to the air

output fitting. The pressure gauge indicates

pressure in the air storage tanks and gives a

visual indication that the compressor is

maintaining pressure properly.

6. The AA-98 compressor will cycle on and off

as air is consumed during use. This is

normal for operation. Turn compressor off if

it is not to be used for extended periods of

time.

7. To turn the compressor off, flip the power

switch to the off (O) position.

PRESSURE

GAUGE

POWER

SWITCH

POWER CORD

RECEPTACLE

10A CIRCUIT

BREAKERS

AIR

OUTLET