Cymbol G3-IP-2MPID-IR 빠른 매뉴얼 - 페이지 10
{카테고리_이름} Cymbol G3-IP-2MPID-IR에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cymbol G3-IP-2MPID-IR 13 페이지. Ir dome camera g3 series
페이지 인쇄3.6 Resetting to the factory default settings
To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
web page (described in User Guide, "3.5.5 System > Maintenance") or use the Reset button on the
network camera, as described below
•
Using the Reset Button
Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset button.
1.
Switch off the Network Camera by disconnecting the power adapter.
2.
Press and hold the Reset button with a straightened paperclip while reconnecting the power.
3.
Keep the Reset button pressed during about 2 seconds or more than.
4.
Release the Reset button.
5.
The network camera resets to factory defaults and restarts after completing the factory
reset.
Caution: When performing a Factory Reset, you will lose any settings you have saved.
(Default IP 192.168.30.220)
3.7 More Information
For more information, please see the Network Camera User Guide, which is available on the CD
included in this package.
Reset Button
Quick Installation Guide
10