Cymbol G3-IP-2MPID-IR Короткий посібник - Сторінка 10

Переглянути онлайн або завантажити pdf Короткий посібник для Камера спостереження Cymbol G3-IP-2MPID-IR. Cymbol G3-IP-2MPID-IR 13 сторінок. Ir dome camera g3 series

Друкувати сторінку

3.6 Resetting to the factory default settings

To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
web page (described in User Guide, "3.5.5 System > Maintenance") or use the Reset button on the
network camera, as described below
•
Using the Reset Button
Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset button.
1.
Switch off the Network Camera by disconnecting the power adapter.
2.
Press and hold the Reset button with a straightened paperclip while reconnecting the power.
3.
Keep the Reset button pressed during about 2 seconds or more than.
4.
Release the Reset button.
5.
The network camera resets to factory defaults and restarts after completing the factory
reset.
Caution: When performing a Factory Reset, you will lose any settings you have saved.
(Default IP 192.168.30.220)
3.7 More Information
For more information, please see the Network Camera User Guide, which is available on the CD
included in this package.
Reset Button
Quick Installation Guide
10