CYMEDICA Orthopedics QB1 사용자 설명서 - 페이지 8

{카테고리_이름} CYMEDICA Orthopedics QB1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CYMEDICA Orthopedics QB1 10 페이지. Knee brace
CYMEDICA Orthopedics QB1에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (7 페이지)

페이지 인쇄
CYMEDICA Orthopedics QB1 사용자 설명서
3.4 Instructions for Operating the QB1 Knee
Brace
The QB1 knee brace can be used to limit or lock out the
flexion and extension range of motion of the knee. Each
brace has an independent hinge on both sides of the knee
joint. The hinge dial is used to adjust the extension and
flexion range of motion of its associated hinge. The
extension limit can be set to -15° (hyperextension) or from 0°
to 90° in 15° increments. The flexion limit can be set from
15° to 135° in 15° increments.
NOTE: The knee brace hinge dials on both sides should
always be adjusted to the identical settings prior to use.
Setting the QB1 knee brace extension and flexion limits:
Removing the extension limit:
Setting the extension limit:
Removing the flexion limit:
07/2019
Rotate the hinge dial towards the EXTENSION setting
until the locking disc pops out and releases the
extension limit.
Rotate the hinge dial to the desired EXTENSION
setting and push in the locking disc firmly until seated.
Rotate the hinge dial towards the FLEXION setting
until the locking disc pops out and releases the flexion
limit.
QB-0090-020 Rev. A, Page 8 of 10