CYMEDICA Orthopedics QB1 Kullanıcı Kılavuzu - Sayfa 8

Tıbbi Ekipman CYMEDICA Orthopedics QB1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. CYMEDICA Orthopedics QB1 10 sayfaları. Knee brace
Ayrıca CYMEDICA Orthopedics QB1 için: Kullanıcı Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (7 sayfalar)

3.4 Instructions for Operating the QB1 Knee

Brace

The QB1 knee brace can be used to limit or lock out the

flexion and extension range of motion of the knee. Each

brace has an independent hinge on both sides of the knee

joint. The hinge dial is used to adjust the extension and

flexion range of motion of its associated hinge. The

extension limit can be set to -15° (hyperextension) or from 0°

to 90° in 15° increments. The flexion limit can be set from

15° to 135° in 15° increments.

NOTE: The knee brace hinge dials on both sides should

always be adjusted to the identical settings prior to use.

Setting the QB1 knee brace extension and flexion limits:

Removing the extension limit:

Setting the extension limit:

Removing the flexion limit:

07/2019

Rotate the hinge dial towards the EXTENSION setting

until the locking disc pops out and releases the

extension limit.

Rotate the hinge dial to the desired EXTENSION

setting and push in the locking disc firmly until seated.

Rotate the hinge dial towards the FLEXION setting

until the locking disc pops out and releases the flexion

limit.

QB-0090-020 Rev. A, Page 8 of 10