akrometrix DIC 사용자 설명서 - 페이지 10

{카테고리_이름} akrometrix DIC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. akrometrix DIC 19 페이지.

Support Triangles (2)

8. Slide the Camera Sub-assembly over the two pins located at the center of the

Common Crossbar Mount Support. There are three possible camera positions.

Choose the position which corresponds with the desired FOV. Some rocking

may be required to fully seat or unseat this assembly as the bushings and pins

are a precise fit.

9. Once the Camera Sub-Assembly is located on the pins and is flush with the

Common Crossbar Mount Support, place two aluminum thumbscrews into the

appropriate holes (marked by red circles in Figure 2.5) and tighten by hand.

10. Attach a trigger box cable and firewire cable to each camera. Secure them to

the top of the Common Crossbar Mount Support using the supplied Velcro strap

as shown in Figure 2.5.

Page 10 of 19

Figure 2.4 DIC AXP Carriage Support Assembly

Warning: Plugging or unplugging the 1394b firewire

cables while power is on can potentially damage 1394b

firewire devices.

40-5000-01500 Rev. A

DIC User Manual

Common Crossbar

Mount Support

Aluminum

Thumbscrews

(3) on Each Side

Glide Rails (2)