ASGCO CHEVRON 설치, 운영 및 유지보수 지침 매뉴얼 - 페이지 2

{카테고리_이름} ASGCO CHEVRON에 대한 설치, 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASGCO CHEVRON 12 페이지. Belt cleaners

페이지 인쇄

Important

Installation

Tools

Selecting a

location

for the

Chevron

ASGCO Mfg., Inc.

Always observe the basic rules of safety when

working with any conveyor system. To avoid

injury and equipment damage, be sure that all

Safety

controls to the conveyor are locked out and the

power source is disconnected at all times

Notice

during installation.

In addition to the items provided by ASGCO, the following will be needed to

install the Chevron Cleaner:

1. Heavy duty file

2. Drill with 1" and ½" bits

3. Cutting or burning equipment

4. Adjustable wrench

To ensure the most efficient cleaning operation possible, ASGCO supplies a

wide range of Chevron assemblies.

ASGCO Chevron Cleaners:

SOLID or NOTCHED

• Solid version could have 6", 8" or 10" diameter discs

• Notched version is only supplied with 8" diameter discs

• Custom-made shafts in various lengths and with a varying number of discs

The Chevron assembly is designed to remove the fine carryback

material. When choosing a mounting location for the Chevron, it is

important to consider the space available. The Chevron assembly can

be mounted on the arc of a pulley or any section of the belt that is flat

and tight.

The belt length required is determined by the diameter of the discs

and the number of shafts. The following chart provides the distance in

inches required to install the various assemblies.

Chevron Assembly mounted on arc of

pulley or flat section of belt

Head

Pulley

5. Tape measure

6. Carpenter's square

7. Straight edge

8. Allen wrench set

Belt Travel

Snub

Pulley

CHEVRON