Clore Automotive PRO-LOGIX PL6800ST 사용 설명서

{카테고리_이름} Clore Automotive PRO-LOGIX PL6800ST에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clore Automotive PRO-LOGIX PL6800ST 2 페이지.

Or Visit: https://cloreautomotive.com/pl6800st-details/

4 things to know when using the PL6800ST:

1. READ THE MANUAL!

Please make sure all personnel using the charger have read the instruction manual and properly familiarize

themselves with the operation of the unit and all warnings.

2. Please use the following guide when charging:

Reason for Charge

Warranty Evaluation

Customer Courtesy

This charger should NOT be used to charge batteries smaller than 25Ah.

3. If you have a totally dead (0V-1V) battery to be charged, but the charger will not activate due to the extremely

low battery State of Charge (SoC), check all connections are correct. If so, you can hold down the START

button for 5 seconds to force the charger to start charging. Once the battery exceeds the circuitry threshold, all

safety features will activate.

4. NEVER operate the charger if the input cable is damaged, the unit itself is damaged, or if there is damage to

the output cables, connectors or clamps. Doing so would result in risk of property damage and personal injury.

ALWAYS replace damaged input or output cables/clamps immediately. ALWAYS take a damaged unit out of

service immediately.

READ ME FIRST

Please visit our PL6800ST Resource page to:

• Register your unit (critical for future support)

• Find replacement parts

• Find great product resources (how to info)

Scan QR Code

Charge Settings

Use 100A Charge Setting Full Size (>60Ah) Passenger Vehicle Batteries

Use 40A Charge Setting

Use 10A Charge Setting

Battery Size

Full Size (>60Ah) Passenger Vehicle Batteries

Small Size (<60Ah) Batteries (Lawn & Garden, Powersports)