Clore Automotive PRO-LOGIX PL6800ST Руководство по использованию
Просмотреть онлайн или скачать pdf Руководство по использованию для Источник питания Clore Automotive PRO-LOGIX PL6800ST. Clore Automotive PRO-LOGIX PL6800ST 2 страницы.
Печатать страницуOr Visit: https://cloreautomotive.com/pl6800st-details/
4 things to know when using the PL6800ST:
1. READ THE MANUAL!
Please make sure all personnel using the charger have read the instruction manual and properly familiarize
themselves with the operation of the unit and all warnings.
2. Please use the following guide when charging:
Reason for Charge
Warranty Evaluation
Customer Courtesy
Customer Courtesy
This charger should NOT be used to charge batteries smaller than 25Ah.
3. If you have a totally dead (0V-1V) battery to be charged, but the charger will not activate due to the extremely
low battery State of Charge (SoC), check all connections are correct. If so, you can hold down the START
button for 5 seconds to force the charger to start charging. Once the battery exceeds the circuitry threshold, all
safety features will activate.
4. NEVER operate the charger if the input cable is damaged, the unit itself is damaged, or if there is damage to
the output cables, connectors or clamps. Doing so would result in risk of property damage and personal injury.
ALWAYS replace damaged input or output cables/clamps immediately. ALWAYS take a damaged unit out of
service immediately.
READ ME FIRST
Please visit our PL6800ST Resource page to:
• Register your unit (critical for future support)
• Find replacement parts
• Find great product resources (how to info)
Scan QR Code
Charge Settings
Use 100A Charge Setting Full Size (>60Ah) Passenger Vehicle Batteries
Use 40A Charge Setting
Use 10A Charge Setting
Battery Size
Full Size (>60Ah) Passenger Vehicle Batteries
Small Size (<60Ah) Batteries (Lawn & Garden, Powersports)